Table of Contents
Advertisement
Connecting and Configuring Your Message Manager
Connecting and Configuring Your Message Manager
Step 2
Hardware Setup
The Wizard will walk you through connecting your Message Manager
to your computer and modem. Follow the steps on the screen using
the pictures as a guide.
2.1
This step instructs you to locate
the cable connected between your
modem and the networking port on
your computer. Unplug this cable
from the computer and plug it into
the WAN port on the Message
Manager. Click "Next" to continue.
2.2
This step instructs you to locate
the Cat-5 Ethernet cable that
is included with your Message
Manager. Plug one end of this
cable into the LAN port on your
Message Manager. Plug the
other end of the cable into the
networking port on your computer.
Click "Next" to continue.
2.3
This step instructs you to connect
your analog phone to Phone Port
of your Message Manager. Plug the
Phone line from your wall outlet
to the Phone Line Port on the
Message Manager. Click "Next"
to continue.
14
14
Advertisement
Table of Contents
