Defining An Rs For An Rsg - Physical View; Defining An Unconnected Rs - Avaya P330 User Manual

Defining an
RS for an
RSG -
Physical
View
Defining an
Unconnected
RS
Avaya P330 Load Balancing Manager User Guide
6. Enter information about the new RS in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to "Editing the RSG and RS Properties Sheets" on
page 70.
To define a new RS for an existing RSG using the Physical View:
1. In the Physical Tree Area, select the RSG to which you want to
add the RS.
2. Click Add .
Or
Select
Edit > Add
dialog box opens.
Figure 6-4. Add Real Server to Real Server Group Dialog Box -
3. Select the RS's IP address from the drop-down list, and click
new RS is added to the selected RSG in the tree.
4. Enter information about the new RS in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to "Editing the RSG and RS Properties Sheets" on
page 70.
To define an unconnected RS:
1. In the Physical Tree Area, select RSs.
2. Click Add .
Or
Select
Edit > Add
3. Enter information about the new RS in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to "Editing the RSG and RS Properties Sheets" on
page 70.
. The Add Real Server to Real Server Group
Physical
. A new RS is added to the tree.
OK . A
68