Firewall Load Balancing Configuration Overview - Avaya P330 User Manual

Firewall Load Balancing Configuration Overview

Avaya P330 Load Balancing Manager User Guide
Configuring Avaya P330 Load Balancing Manager for FWLB involves
several steps. This section provides an overview of the entire process,
and the following sections explain each step in detail.
To configure Avaya P330 Load Balancing Manager to perform FWLB:
1. Define one or more firewall services (refer to "Defining a Firewall
Service" on page 29).
2. Add and edit entries in the Routing Table (refer to "Editing the
Routing Table" on page 30).
3. Define an RSG (refer to "Defining RSGs and RSs for FWLB" on
page 31).
4. Define one or more RSs (refer to "Defining RSGs and RSs for
FWLB" on page 31).
After you define a new FWLB element, click
configuration changes to the device. To save the configuration changes,
click . For more information about applying and saving changes,
Commit
refer to "Saving Configuration Changes" on page 24.
Send to Device to apply the
28