Defining A Connected Rsg - Avaya P330 User Manual

Defining a
Connected
RSG
Avaya P330 Load Balancing Manager User Guide
To define a new RSG in relation to other load balancing elements:
1. In the Logical View, select a Virtual Service from the Tree Area or
Table Area.
2. Click anywhere inside the RSG Area so that the RSG Area receives
the focus.
3. Click .
Add
Or
Select Edit > Add
Figure 6-1. Add Real Server Group Dialog Box
4. Select Primary
Or
Select
Backup for RSG
primary RSG from the pull-down list box to which you assign the
backup.
5. Select Create New
Or
Select Select Existing
load balancing elements, and select the existing RSG from the
drop-down list.
6. Click . The RSG is added to the RSG Area.
OK
7. Enter information about the RSG in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to "Editing the RSG and RS Properties Sheets" on
page 70.
. The Add Real Server Group dialog box opens.
to create a primary RSG.
to create a backup RSG, and select the
to create a new RSG, and enter the RSG's name.
to define an existing RSG in relation to other
64