Bridging Firewall Properties Sheet; Launching Another Avaya Device Manager - Avaya P330 User Manual

Bridging Firewall Properties Sheet

Launching Another Avaya Device Manager

Avaya P330 Load Balancing Manager User Guide
The following tables list the fields in the Bridging Firewall Properties
Sheet and their descriptions.
Table 3-4. Bridging Firewall Properties Sheet Fields
Field Description
Name
A user-defined name for the service.
Admin Status
The user-defined status of the service. Available
options are:
Operational
The operational status of the service. This field is
Status
read only. The possible values are:
Metric
The metric used in load balancing decisions.
For more information about metrics, refer to "Load
Balancing Metrics" on page 13.
Health Check The health check method used to check the validity
of all paths through the firewall.
The number of paths that are valid for this service.
Live Servers
Partner The management IP address of the Load Balancing
Management IP
device operating on the other side of the firewall.
For transparent and bridging FWLB, two load balancers are necessary,
one for each side of the firewalls. The two devices must be identically
configured. Avaya P330 Load Balancing Manager allows you to launch
the device manager of another load balancer so that you can configure
both devices the same way.
To launch another device manager:
1. Select a Bridging FWLB component.
• Enable
• Disable
• Up - the paths are operational
• Down - all paths through the firewall are not
operational, or no paths are configured.
34