Applied Changes; Committed Changes - Avaya P330 User Manual

Chapter 2

Applied Changes

After finalizing all configuration changes, the changes must be applied to
the device. Applied changes affect the current configuration but are not
saved when the device is reset.
To apply the changes to the device:
The applied changes remain in effect until the device is reset. When the
device is reset, it is configured with the last committed configuration. All
changes applied but not committed are lost.
When you switch the focus from one screen area to another without
applying changes, a message prompts you to apply the configuration
changes that you made to the device. Changes to Properties Sheets are
stored locally until you apply the changes to the device. Therefore, no
message appears when you switch from one Properties Sheet to another.

Committed Changes

To make configuration changes permanent, the changes must be
committed (saved) to the device.
To commit the configuration to the device:
* Note: The commit operation may take up to 20 seconds. Avoid
25
Click Send to Device .
Or
Select
Action > Send to Device
applied to the device.
Click .
Commit
Or
Select . The changes are saved to the device.
File > Commit
running other operations while committing changes to the
device.
. The configuration changes are
Avaya P330 Load Balancing Manager User Guide