Defining Rsgs And Rss For Fwlb; Editing The Properties Sheets For Fwlb - Avaya P330 User Manual

Chapter 3
* Note: When the focus is on the Routing Table, the Properties Sheet

Defining RSGs and RSs for FWLB

After you define a firewall service, you can define the RSGs that are
connected to the service. The RSG Area displays the RSGs related to the
firewall service selected in the Logical Tree Area. You can add or delete
RSGs for each firewall service.
The RS Area displays the RSs belonging to the RSG selected in the RSG
Area. You can add or delete RSs for each RSG.
For more information about defining and deleting RSGs and RSs, refer to
Chapter 6, Real Server Groups and Real Servers.

Editing the Properties Sheets for FWLB

When you add a new entity for load balancing configuration, the Form
Area displays the Properties Sheet of the new entity. The following figure
displays a Routing Firewall Properties Sheet.
31
displayed in the Form Area is not related to the selected
entry in the Routing Table. Rather, the Properties Sheet is
related to the firewall service that is selected in the tree.
Figure 3-2. Routing Firewall Properties Sheet
Avaya P330 Load Balancing Manager User Guide