Chapter 6
Defining an RS
There are two ways to define an RS. You can define an RS for an existing
RSG, or you can define an unconnected RS. When you define an RS for
an existing RSG, you can use either the Logical View or the Physical
View.
Defining an
To define a new RS for an existing RSG using the Logical View:
RS for an
RSG - Logical
View
* Note: RS ID is relevant for Routing FWLB only.
67
1. In the Logical View, select an RSG from the RSG Area. The RS
Table opens in the RS Area.
2. Click anywhere in the RS Area so that the RS Area receives the
focus.
3. Click
Add
.
Or
Select
. The Add Real Server to Real Server Group
Edit > Add
dialog box opens.
Figure 6-3. Add Real Server to Real Server Group Dialog Box -
4. Select
Create New
address and ID.
Or
Select
Select Existing
selected RSG, and select the RS's IP address from the drop-down
list.
5. Click
OK
. A new RS is added to the RS Table.
Logical
to create a new RS, and enter the RS's IP
to define an existing RS in relation to the
Avaya P330 Load Balancing Manager User Guide