Defining A Service - Avaya P330 User Manual

Chapter 5

Defining a Service

The first step in configuring AR is defining a service. To define a new
service:
When you select a service from the Virtual Services Table, the RSG Area
displays the related RSGs and the Form Area displays the service's
Properties Sheet.
To modify an existing service:
To delete a service:
55
1. In the Logical Tree Area, select AR from the load balancer module
you are currently configuring, and then select Services. The Table
Area displays the Virtual Services Table.
2. Click anywhere in the Table Area so that the Table Area receives
the focus.
3. Click Add .
Or
Select . A new row is added to the Virtual Services
Edit > Add
Table.
4. Enter information about the new service in the Properties Sheet.
For more information about entering information in the
Properties Sheet, refer to "Editing the Properties Sheets for AR"
on page 59.
1. Select the service from the Virtual Services Table
2. Edit the information in the Properties Sheet.
1. Select the service from the Virtual Services Table.
2. Click Delete.
Or
Select
Edit > Delete
. The Virtual Service is deleted.
Avaya P330 Load Balancing Manager User Guide