Defining Rsgs And Rss For Application Redirection; Defining A Rule - Avaya P330 User Manual

Defining RSGs and RSs for Application
Redirection

Defining a Rule

Avaya P330 Load Balancing Manager User Guide
After you define a service, you can define the RSGs that are connected to
the new service. The RSG Area displays the RSGs related to the service
selected in the Virtual Services Table. If no service is selected in the
Virtual Services Table, no information is displayed in the RSG Area.
The RS Area displays the RSs belonging to the RSG selected in the RSG
Area. You can add or delete RSs for each RSG.
For more information about defining and deleting RSGs and RSs, refer to
Chapter 6, Real Server Groups and Real Servers.
A rule maps a service and its related RSGs and RSs to source and
destination IP addresses. A service may have more than one rule.
To define a new rule:
1. In the Logical Tree Area, select AR from the load balancer module
you are currently configuring, and then select Rules. The Table
Area displays the Rules List.
2. Click anywhere in the Table Area so that the Table Area receives
the focus.
3. Click Add .
Or
Select Edit > Add
4. Enter information about the new rule in the Rules List.
. A new rule is added to the Rules List.
56