Rt (Radio Text); Advanced Operation; Remote Control Unit; Operating Denon Audio Components - Denon avr-2106 Operating Instructions Manual

Basic Operation

RT (Radio Text)

"RT" appears on the display when radio text data is received.
1
Set the input source to "TUNER".
2
RT
Press the button.
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press the RT button again.
If no text data is being broadcast, "NO TEXT DATA" is
displayed.

Advanced Operation

Remote control unit

Operating DENON audio components

1
MODE 1
Set the switch to "AUDIO".
2
MODE 2
Set the switch to the position for the
component to be operated (CD, CDR/MD or
TAPE).
3
Operate the audio component.
For details, refer to the component's operating instructions.
While this remote control is compatible with a wide range of
infrared controlled components, it may be the case that
some component models cannot be operated with this
remote control.
1. CD player (CD), CD recorder and MD recorder (CDR/MD)
system buttons
, : Manual search (forward and reverse)
6 7
: Stop
2
: Play
1
, : Auto search (cue)
8 9
: Pause
3
DISC SKIP + : Switch discs (for CD changers only)
30
ENGLISH
MODE 1
2. Tape deck (TAPE) system buttons
: Rewind
6
: Fast-forward
7
: Stop
2
: Forward play
1
: Reverse play
0
A/B : Switch between decks A and B
3. Tuner system buttons
SHIFT : Switch preset channel range
CHANNEL +, – : Preset channel up/down
TUNING +, – : Frequency up/down
BAND : Switch between the AM
and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory
• TUNER can be operated when the switch is at "AUDIO"
position.
ENGLISH
MODE 2