Omron TJ2-MC64 Hardware Reference Manual page 150

Hardware reference
Note
In the case of an incorrect registration due to slow edges or noise,
a digital noise filter can be enabled with the REGIST command.
Refer to the BASIC Commands in the Programming Manual.
Note
A maximum of 4 inputs on is allowed simultaneously.
Digital outputs
The following table and illustration details the digital output specifications:
/i
Item Specification
Type PNP
Maximum voltage 24 VDC + 10%
Current capacity 100 mA each output (400 mA for a group of 4)
Max. Voltage 24 VDC + 10%
Protection Over current, Over temperature and 2A fuse on
Common
Output response time (PSwitch):
140 µs maximum
•
HARDWARE REFERENCE MANUAL
fig. 74
TJ 1-FL02
2A Fuse
18 24V output supply
13 Out 0
Equivalent
circuit
17 0V I/O
To other output circuits
External
power
supply
24V
145