Omron TJ2-MC64 Hardware Reference Manual page 103

Hardware reference
CN5 Monitor connector
The table below shows the pin layout for the CN5 monitor connector.
/i
Pin Signal Name
1 AM1 Analog monitor output 1
2 AM2 Analog monitor output 2
3 GND Analog monitor ground
4 --- Reserved: do not connect.
5 --- Reserved: do not connect.
6 --- Reserved: do not connect.
CN7 USB Connector
The table below shows the pin layout for the CN7 USB connector.
/i
Pin Signal Name
1 VBUS
2 D+ USB signal terminal
3 D-
4 --- Reserved: do not connect.
5 SENGND Signal ground
CN8 Safety connector
The table below shows the pin layout for the CN8 safety connector.
/i
Pin Signal Name
1 --- Reserved: do not connect.
2 --- Reserved: do not connect.
3 SF1- Safety input 1
4 SF1+
5 SF2- Safety input 2
6 SF2+
7 EDM- EDM output
8 EDM+
HARDWARE REFERENCE MANUAL 98