Hardware reference
3.4.2
LED Display
The LED display shows the following information:
/i
Information
When
IP address and
Shows 3 times when you connect the Trajexia system to the
subnet mask
power supply.
IP address
Shows 4 times when you connect an Ethernet cable to the
Ethernet connector of the TJ1-MC__ and to a PC.
RUN
When the TJ1-MC__ operates a Servo Driver.
OFF
When the TJ1-MC__ does not operate a Servo Driver.
ERR + code
When an error occurs in the Trajexia system.
The code is the error code. Refer to troubleshooting chapter
in the Programming Manual.
HARDWARE REFERENCE MANUAL
fig. 20
69