C-5 Connection Object (Class 0X05) - Omron MX2 DEVICENET OPTION BOARD User Manual

Connection Object (Class 0x05)
C-5 Connection Object (Class 0x05)
Supported Service Codes
Object Details
Table C-9 Connection Object - Object Details
Instance Attribute
(hex) (hex)
01 01 State
Explicit
02 Instance type
03 TransportClass
_Trigger
04 DeviceNet_Pro
duced_Connec
tion_ID
05 DeviceNet_Co
nsumed_Conn
ection_ID
06 Initial Comm
characteristics
07 Produced con-
nection size
08 Consumed
connection size
09 Expected
packet rate
0C Watchdog tim-
eout action
0D Produced con-
nection path
length
0E Produced con-
nection path
0F Consumed
connection
path length
10 Consumed
connection
path
11 Production
inhibit time
12 Connection
timeout multi-
plier
Table C-8 Connection Object - Supported Service Codes
Service Code No. (hex)
0E
10
Name Content
Status of the instance
Type of the instance
Defines behaviour of the connec-
tion
Label indicating communication ID
as set by DeviceNet master Unit.
Label indicating communication ID
as set by DeviceNet master Unit.
Indicates the communication con-
figuration for the DeviceNet master
Unit.
Indicates the maximum number of
bytes for transmission.
Indicates the maximum number of
bytes for reception.
Indicates the length of the internal
processing timeout when a com-
munication request is received
(incremented by 10 ms units)
Indicates the action for internal
processing timeout related to com-
munications.
00: Retain timeout status (until
reset or cleared)
01: Cut connection automatically
02: Operate again with same con-
nection as is
Number of bytes for produced con-
nection path.
No data for explicit messages
Specifies the application object for
produced connection path.
No data for explicit messages
Number of bytes for consumed
connection path.
No data for explicit messages
Specifies the application object for
consumed connection path.
No data for explicit messages
Specifies the production inhibit
timer value.
Specifies the multiplier for the con-
nection timeout event.
Service
Get attribute single
Set attribute single
Setting Default
range
----
----
---- 83 Hex
---- ----
---- ----
---- 21 Hex
---- 260
---- 260
0 -
65535
----
----
---- Empty
----
---- Empty
----
---- Fixed to 4
APPENDIX C
Get Set Size
3 Yes No USINT
0 Yes No USINT
Yes No BYTE
Yes No UINT
Yes No UINT
Yes No BYTE
Yes No UINT
Yes No UINT
0 Yes Yes UINT
1 Yes Yes USINT
0 Yes No UINT
Yes No ARRAY
0 Yes No UINT
Yes No ARRAY
0 Yes No UINT
Yes No USINT
59