Omron H5CX Manual page 45

DIP Switch Settings
All functions are set using the DIP switch.
Item
1 Time range Refer to the table on the right.
2
3 Output mode F-1 mode
4 Input signal width 20 ms
5 NPN/PNP input NPN
mode
6 Reset Key protec- Disabled
tion
7 Up Key protection Disabled
8 Mode Key protec- Disabled
tion
Note 1: All the pins are factory-set to OFF.
2: DIP switch settings are effective when the power is turned
ON again. (Set the DIP switch before installation and power-
up.)
3: The characters displayed in reverse video are the default set-
tings.
Operation in Run Mode
Set each digit for the set value using the corresponding
Forecast Value Setting
Present value
Set value
Present value
Forecast set value
Absolute Value Setting
Present value
Set value 1
Present value
Set value 2
OFF ON
A mode
1 ms
PNP
Enabled
Enabled
Enabled
Keys.
Each time the Key is
pressed, the sub-display
will switch between the set
value ("SET" is lit) and the
forecast set value ("1" is lit).
Each time the Key is
pressed, the sub-display
will switch between set
value 1 ("SET 1" is lit) and
set value 2 ("SET 2" is lit).
Pin 1 Pin 2
OFF OFF 0.1 h to 99999.9 h
ON OFF 0.01 s to 9999.99 s
OFF ON 0 h 00 min 01 s to 99 h 59 min 59 s
ON ON 0.1 min to 99999.9 min
ON
OFF
2-stage Digital Timer
Time range
1 2 3 4 5 6 7 8
(Default setting)
H5CX-B
45