Omron H5CX Manual page 13

Dimensions with Flush Mounting Adapter
H5CX-A/-AS (Provided with Adapter and Waterproof Packing)
58
H5CX-AD/-ASD (Provided with Adapter and Waterproof Packing)
58
H5CX-A11/-A11S (Adapter and Waterproof Packing Ordered Separately)
58
H5CX-A11D/-A11SD (Adapter and Waterproof Packing Ordered Separately)
58
H5CX-L8@ (Adapter and Waterproof Packing Ordered Separately)
58
Y92S-29 (provided)
Panel
Waterproof Packing
(51)
48 7.5
Y92S-29 (provided)
Panel
Waterproof Packing
(51)
48 7.5 62.5
Panel
Y92S-29 (order separately)
Y92F-30 (order separately)
Waterproof Packing
Flush Mounting Adapter
(51)
48 7.5
Panel
Y92S-29 (order separately)
Waterproof Packing
(51)
48 7.5
Y92S-29 (order separately)
Panel
Y92F-30 (order separately)
Waterproof Packing)
Flush Mounting Adapter
(51)
48 7.5
Y92F-30 (provided)
Flush Mounting Adapter
98.5
Y92F-30 (provided)
Flush Mounting Adapter
P3GA-11
(order separately)
Rear Surface
Connection
Socket
98.7
Y92F-30 (order separately)
Flush Mounting Adapter
P3GA-11
(order separately)
Rear Surface
Connection
Socket
89.9
P3GA-11
(order separately)
Rear Surface
Connection
Socket
84.8
Multifunction Digital Timer
Panel Cutouts
Panel cutouts areas
shown below.
(according to DIN43700).
60 min.
+0.6
45
−0
+0.6
45
−0
60 min.
15 min.
Note 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operability, it is
recommended that Adapters are
mounted so that the gap between
sides with hooks is at least 15 mm.
3. It is possible to mount timers side
by side, but only in the direction
without the hooks.
n side by side mounting
A
A = (48n − 2.5) +1
0
With Y92A-48F1 attached.
A = {48n−2.5 + (n−1) x 4}
0
With Y92A-48 attached.
+1
A = (51n−5.5)
0
H5CX-A/-L
13