Omron H5CX Manual page 27

Settings for Advanced Functions
Settings that cannot be performed with the DIP switch are performed with the operation keys.
Power ON
(See note 1.) (See note 2.)
3 s min. 3 s min.
OFF time
range
ON time
range
Timer mode
ON/OFF
start mode
Input signal
width
NPN/PNP
input
Display color
Key protect
level
For details on operations in run mode, refer to page 29.
Note 1. If the mode is switched to the function setting mode during operation, operation will
continue.
2. Changes made to settings in function setting mode are enabled for the first time when
the mode is changed to run mode. Also, when settings are changed, the timer is reset
(time initialized and output turned OFF).
The characters displayed in reverse video are the initial values.
When performing settings with operation keys only, set pin1 of the
DIP switch to OFF (factory setting). If pin 1 of the DIP switch is set
to ON, the setting items indicated by
Set the OFF time range using the
s s
For details, refer to Time Range List below.
Set the ON timer range using the
s s
For details, refer to Time Range List below.
Set the timer mode using the
(Elapsed (Remaining
time) time)
Set the twin timer output mode using the
(Flicker OFF (Flicker ON
start) start)
Set the input signal width using the
(20 ms) (1 ms)
Set the NPN/PNP input mode using the
(NPN input) (PNP input)
Only displayed for H5CX-A@ and H5CX-A11@ models.
Set the display color using the
(Red) (Green) (Red-green) (Green-red)
Displayed for terminal-block models (H5CX-A@) only.
Set the key protect level using the
(KP-1) (KP-2)
Multifunction Digital Timer
will not be displayed.
keys.
......
s h
keys.
......
s h
keys.
keys.
keys.
keys.
keys.
keys.
(KP-3) (KP-4) (KP-5)
H5CX-A/-L (Twin Timer Function)
s
s
Time Range List
Display Set Value
0.01 s to 99.99 s (default setting)
0.1 s to 999.9 s
1 s to 9999 s
0 min 01 s to 99 min 59 s
0.1 min to 999.9 min
1 min to 9999 min
0 h 01 min to 99 h 59 min
0.1 h to 999.9 h
1 h to 9999 h
0.001 s to 9.999 s
27