Error Settings; Startup Mode - Omron F400 - 06-1999 Operation Manual

Error Settings

2. Move the cursor to Startup scene , and press the ENT Key.
3. Move the cursor to the desired scene and press the ENT Key.
4. Set the startup mode in the same way.
5. When all the desired settings have been made, move the cursor to End and
Example:
Startup scene: OFF
Startup mode: Run
Startup scene: OFFB
Startup mode: RUNB
End
5-7 Error Settings
While the BUSY signal is ON, the F400 is processing data and cannot receive STEP
signals. The ERR terminal can be set to turn ON in order to notify an external machine
that a STEP signal has not been received while the BUSY signal is ON.
108
The settings will be displayed.
Startup scene:
Startup mode: MONB
End
The setting will be saved.
Startup scene: Scn 0B
Startup mode: MONB
End
press the ENT Key.
The settings will be saved, and the display will return to the window shown in step
1.
Startup scene: Scn 1B
Startup mode: MONB
End
After setting
measurement
conditions for
scene 1, save
the settings.
Scn 0B 2
OFF
Scn 0
3
Scn 1
Scn 2
Scn 3
Scn 4
Scn 5
Scn 6
5
The next time the power is turned ON:
Run Mode for scene 1 will be started. Measurement
can be performed immediately.
Scn 1BRUNB
Color thr
Section 5-7
— Filter/Pickup —