Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated)
EE-SX47/67
Photomicrosensor with 50- to 100-mA
direct switching capacity for built-in
application.
■ Series includes models that enable switching between
dark-ON and light-ON operation.
■ Response frequency as high as 1 kHz.
■ Easy operation monitoring with bright light indicator.
■ Wide operating voltage range: 5 to 24 VDC
■ Models in which the light indicator turns ON for dark-ON
operation are also available.
■ A wide range of variations in eight different shapes.
■ Flexible robot cable is provided as a standard feature.
Be sure to read Safety Precautions on
page 8.
*1. Only the EE-SX67 Series has pre-wired models.
*2. Pre-wired models only.
Ordering Information
Connector models
Appearance
Standard
L-shaped
T-shaped
Close-
mounting
Close-
mounting
T-shaped,
slot center:
10 mm
F-shaped
R-shaped
*3. These models can be used as Light-ON when the L terminal and positive (+) terminal are connected to each other. To use them as Dark-ON, do not connect these terminals
to each other. When used at light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are short-circuited in advance.