Omron EE-SX47 Datasheet page 19

Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated)
EE-SX91
Meeting Customer Needs with Compact
Sensors that Mount with M3 Screws
■ Provided with Both light-ON and dark-ON outputs
(antivalent outputs).
■ A compact size and choice of five shape for various
applications.
■ Design available with Compact NPN or PNP output models.
■ Allows standard M3 or M2 screws.
■ Indicator is visible from many directions for installation
in any location.
■ Possible to directly switch up to 100 mA.
■ Models with junction connectors for simplify wiring and maintenance.
■ Flexible robot cables are standard on all models.
Features
A Compact Size and Choice of Five Shape for
various Applications
Selectable any five shape to minimize the space required.
Design available with Compact NPN or PNP
Output Models
Both NPN and PNP output models are available for use according to
system requirements.
Possible to directly switch up to 100 mA
Output control of up to 100 mA is supported for either NPN or PNP
outputs.
Models with Connectors for Simplify Wiring
and Maintenance
Using models with connectors allows wiring to be used as it is, with
no need to replace anything but sensors.
20
Flexible Robot Cables are Standard on All
Models
Robot Cables are effective for moving parts, and are provided as
standard equipment with all models.
Provided with Both Light-ON and Dark-ON
Outputs
Both light-ON and dark-ON outputs are provided on all models,
allowing outputs to be switched by simply changing the wiring
according to the application.
Indicator Visible from Many Directions for
Installation in Any Location
The light indicator can be checked from up to four directions.
Allows standard M3 or M2 Screws
The EE-SX91 can be mounted using M3 or M2 screws, so it can be
easily replaced from an existing compact sensor mounted with M2
screws.