Ratings And Specifications - Omron EE-SX47 Datasheet

EE-SX47/67

Ratings and Specifications

Type
Connector
NPN
mod- Pre-wired
els models
Models with junc-
tion connectors
Connector
PNP
mod- Pre-wired
els models
Models with junc-
Item tion connectors
Sensing distance
Sensing object
Differential distance
Light source
Indicator *1
Supply voltage
Current consumption
Control output
Response frequency *2
Ambient illumination
Ambient temperature range Operating: − 25 to +55 ° C, Storage: − 30 to +80 ° C
Ambient humidity range
Vibration resistance
Shock resistance
Enclosure rating
Connecting method
Connector
Pre-wired
Weight
models
(pack-
Models with
aged)
junction con-
nectors
Case
Ma-
terial
Cover emitter/receiver Polycarbonate
*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the rotating disk
shown at the right.
Connector for the EE-SX67 with Junction Connector
Appearance
Item
Contact resistance
Insertion strength
Surplus strength
(housing holding strength)
Cable length
Ambient temperature range
Housing
Materials
Contact
6
Standard L-shaped
EE-SX670 EE-SX671
EE-SX670A EE-SX671A
EE-SX470 EE-SX471
EE-SX670- EE-SX671-
WR WR
EE-SX670- EE-SX671-
C1J-R C1J-R
EE-SX670P EE-SX671P
EE-SX670R EE-SX671R
EE-SX470P EE-SX471P
EE-SX670P- EE-SX671P-
WR WR
EE-SX670P- EE-SX671P-
C1J-R C1J-R
5 mm (slot width)
Opaque: 2 × 0.8 mm min.
0.025 mm
GaAs infrared LED with a peak wavelength of 940 nm
Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
5 to 24 VDC ±10%, ripple (p-p): 10% max.
35 mA max. (NPN models), 30 mA max. (PNP models)
NPN open collector: 5 to 24 VDC, 100 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
PNP open collector: 5 to 24 VDC, 50 mA max.
50 mA load current with a residual voltage of 1.3 V max.
1 kHz min. (3 kHz average)
1,000 lx max. with fluorescent light on the surface of the receiver.
Operating: 5% to 85%, Storage: 5% to 95%
Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
2
Destruction: 500 m/s for 3 times each in X, Y, and Z directions
IEC60529 IP50
Special connectors (direct soldering possible), Pre-wired models (Standard cable length: 1 m), Models with junction
connectors (Standard cable length: 0.1 m)
Approx. 3.1 g Approx. 3 g
Approx. 18.9 g Approx. 17.3 g Approx. 17.8 g Approx. 16.8 g Approx. 17.1 g Approx. 18.3 g Approx. 16.9 g Approx. 16.9 g
Approx. 6.3 g Approx. 4.7 g Approx. 5.2 g Approx. 4.2 g Approx. 4.5 g Approx. 5.7 g Approx. 4.3 g Approx. 4.3 g
Polybutylene phthalate (PBT)
Product Connector with Robot Cable
Model EE-1016-R-1
25 m Ω max.(at 10 mA DC and 20 mV max.)
20 N max.
15 N min.
2 m
− 25 to 85 ° C
Nylon
Phosphor bronze
T-shaped, slot
Close-mounting
center: 7 mm
EE-SX672 EE-SX673 EE-SX674
EE-SX672A EE-SX673A EE-SX674A
EE-SX472 EE-SX473 EE-SX474
EE-SX672- EE-SX673- EE-SX674-
WR WR WR
EE-SX672- EE-SX673- EE-SX674-
C1J-R C1J-R C1J-R
EE-SX672P EE-SX673P EE-SX674P
EE-SX672R EE-SX673R EE-SX674R
EE-SX472P EE-SX473P EE-SX474P
EE-SX672P- EE-SX673P- EE-SX674P-
WR WR WR
EE-SX672P- EE-SX673P- EE-SX674P-
C1J-R C1J-R C1J-R
2
)
Approx. 2.4 g Approx. 2.3 g Approx. 3 g
1 mm
1 mm
2.1 mm
t = 0.2 mm
5.8
4
3
10
2
2
1
Terminal Arrangement
1
2 L
3
4 OUT
T-shaped, slot
F-shaped
center: 10 mm
EE-SX675 EE-SX676
EE-SX675- EE-SX676-
WR WR
EE-SX675- EE-SX676-
C1J-R C1J-R
EE-SX675P EE-SX676P
EE-SX675P- EE-SX676P-
WR WR
EE-SX675P- EE-SX676P-
C1J-R C1J-R
Approx. 2.7 g Approx. 2.2 g Approx. 2.2 g
Disk
8 10 2000
Robot cable with 2.8 dia., 4 conductors,
(conductor cross-section: 0.15 mm
diameter: 0.8 mm); Standard length: 2 m
Brown
Pink
Blue
Black
R-shaped
EE-SX677
EE-SX677-
WR
EE-SX677-
C1J-R
EE-SX677P
EE-SX677P-
WR
EE-SX677P-
C1J-R
16
2
, insulator