End Instruction - Omron CP1L CPU Getting Started Manual

7.
Click [Detail].
8.
Select [Up] for Differentiation. Click [OK].
An upward arrow representing a differentiated up condition will be displayed on the
contact.

4-5-8 END Instruction

Ladder programs must be terminated with an END instruction.
When a new program is created in CX-Programmer, a section inclusive of an END
instruction will be inserted automatically. Hence, there is no need to input an END
instruction manually.
To confirm the ladder program containing only the END instruction, double-click the
[END] section.
4-5 Inputting Programs
SYSMAC CP1L Getting Started Guide
4
4
69