5
5-2 Adjusting/Debugging Online
5
5-2-2 Force-Setting/Force-Resetting
Note
88
SYSMAC CP1L Getting Started Guide
CX-Programmer can control inputs, independent of inputs from I/O devices. Use
this function to force input conditions and output conditions during test runs.
Before force-setting/force-resetting/releasing or setting/resetting, confirm that the
facility will not be affected.
The force-setting procedure is as follows.
1.
Change CP1L to the MONITOR or PROGRAM operating mode.
2.
Place the cursor on the contact to force-set.