Table of Contents
Advertisement
13. Adjusting Module Flatness
The Planar UltraRes L Series Display will come pre-adjusted as necessary out of the box.
However there may be a need to fine tune the flatness due to a replacement module or a
module placed in a different location than where it was when it came out of the box. Follow the
procedure below to adjust modules as needed.
1. Determine which module is out of flat. Typically, this will be the one that is not aligned with
all of the surrounding modules. This can be seen visually as dark lines in a bright image
and/or felt with a finger as it is dragged over the surface of the display.
Planar UltraRes L Series 109" User Manual
020-1434-00A
65
Page | 65
Advertisement
Table of Contents
