Audio Menu - Planar UltraRes URL109-MFT User Manual

20.2 Audio Menu

This menu provides the ability to make audio adjustments to the selected zone.
Note: Volume, Bass, Treble and Balance do not apply to the S/PDIF output.
Audio Select
• The zone that is currently being adjusted and whose audio is being played. The zone's
corresponding input source is shown in the title bar.
•
Options: Zone 1, Zone 2, Zone 3, Zone 4; Default: Zone 1
•
Note: Changing the Audio Select setting via the ZONE 1-4 keys on the remote also
changes the Current Zone setting.
Volume
•
Set the volume of the audio
•
Range: 0~100; Default: 50
Bass
•
Set the bass level
•
Range: 0~100; Default: 50
•
Note: This setting applies only to the internal speakers, and cannot be adjusted for the
Line Out connector.
Treble
•
Set the treble level
•
Range: 0~100; Default: 50
•
Note: This setting applies only to the internal speakers, and cannot be adjusted for the
Line Out connector.
Balance
•
Set the audio balance
•
Range: 0~100; Default: 50
Planar UltraRes L Series 109" User Manual
020-1434-00A
86
Page | 86