Table of Contents
Advertisement
16.2 Locking the Keypad and IR Remote
You can lock the keypad and IR remote functionality on the display. To lock the keypad, go to
Main Menu -> Advanced Settings -> System Settings and select Keypad Lock. To lock the IR
remote, go to Main Menu -> Advanced Settings -> System Settings and select IR Remote Lock.
16.3 Locking/Unlocking the OSD Menus
You can lock or unlock the OSD menus by pressing a series of key commands on the remote
lock
control. To
the menu, press the following keys on the remote in the order listed:
,
,
,
ENTER
EXIT
EXIT
ENTER
Depending on whether you locked or unlocked the menu, you will see one of the following
messages on the screen.
16.4 Turning the Display On
1. Insert the power cord into the display and into the power outlet.
2. Ensure the AC switch is set to "—".
3. Press the ON button on the remote or the power button on the keypad.
16.5 Turning the Display Off
With the power on, press the OFF button on the remote or the power button on the keypad to
put the LCD panel in a standby mode. To turn off power completely, turn the AC switch to "O" or
disconnect the AC power cord from the power outlet.
Note: The display may automatically turn off the backlight or enter standby mode if no signal is
present for a certain period of time. See the description of the Power Saving Mode setting on
page 43 for more information.
16.6 Adjusting the Volume
1. Using the remote, press the vol + or vol - to increase or decrease the volume. You can
also use the Up and Down keys on the remote and keypad to increase or decrease the
volume.
2. Press the mute button to temporarily turn off all sound. To restore the sound, press the
mute button again.
Note: The analog audio out is variable. S/PDIF is fixed.
Planar UltraRes W Series User Manual
020-1420-00A
unlock
and
. To
it, simply follow the same sequence.
EXIT
,
ENTER
Page | 32
Advertisement
Table of Contents
