Table of Contents
Advertisement
10.5 Installing the Mount Bars on the Wall
1. Using the dimension and positioning mount bar centerline as shown, secure left end of top
mount bar assembly with attachment hardware (not included) into a wall stud. Use a level
to ensure the mount bar assembly is leveled horizontally. Secure mount bar assembly to
the wall studs as available with the mounting slot patterns.
Note: Use sufficient quantity of hardware in the top mount bar to keep display from pulling
the mount away from the structure.
Mount bar centerline
2. Install bottom mount bar using the dimension from the top mount bar. Use a level to
ensure the mount bar assembly is leveled horizontally. Use a level to ensure the left ends
of the mount bars are plumb vertically. Secure the bottom mount bar assembly to the wall
studs as available with the mounting slot patterns.
Planar UltraRes L Series 109" User Manual
020-1434-00A
32
[10.24in]
260mm
Image
Center
[26.61in]
676mm
Page | 32
Advertisement
Table of Contents
