Turning The Display Off; Adjusting The Volume; Selecting The Input Source; Navigating Through The Menus - Planar EP6514K User Manual

Turning the Display Off

Turning the Display Off
With the power on, press the power button on the remote or side control panel to
put the LCD panel in a standby mode. To turn off power completely, turn the AC
switch to "O" or disconnect the AC power cord from the power outlet.
Note:
standby mode.

Adjusting the Volume

1
2
Note:

Selecting the Input Source

Do one of the following:
Note:

Navigating Through the Menus

1
2
3
28
If there is no signal for a certain period of time, the LCD panel will automatically go into
Using the remote, press the
volume.
Press the button to temporarily turn off all sound. To restore the sound,
MUTE
press the button again.
MUTE
The analog audio out is variable. S/PDIF is fixed.
• Using the remote, press the desired source button (
4, ).
HDMI VGA
• Press the source button on the display's keypad. Use the arrow buttons (
to select one of the following input sources and press
1, 2,
HDMI HDMI HDMI
When the display cannot find a source, a "No signal" message will appear.
With the power on, press
Within the menu, use
adjust options.
Press to return to the previous menu. To exit the menu system, press
MENU
EP-Series Ultra HD LCD Displays User Guide
- or
VOLUME VOLUME
3, 4, .
HDMI VGA
. The menu appears.
MENU INPUT
, , , 
and
ENTER
+ to increase or decrease the
1, 1,
DP HDMI HDMI
:
ENTER DISPLAYPORT
to navigate through the menus and
2, 3,
HDMI
 
)
1,
.
EXIT