Table of Contents
Advertisement
10.10 Installing Side and Top Trim Parts
The side and top trim parts contain the IR touch sensor.
Caution:
Great care must taken when handling these components, to ensure that the ribbon
cables and pins that connect each portion of the sensor are not damaged during the assembly
and installation process.
1. Place the top left trim on the top left side of the display and install 1X M3 x 6 FHMS BLK in
the first mounting hole on the left end of the trim piece as shown.
Caution:
There are magnets near the mounting holes that can attract a loose screw as it
is installed.
Planar UltraRes L Series 109" User Manual
020-1434-00A
56
M3 x 6 FHMS BLK
Top Left Trim
Page | 56
Advertisement
Table of Contents
