10.7 Assembling and Installing Electronic Box
1. Unscrew the front covers from the electronics assemblies and remove. The covers are
held in place by magnets as well so extra force may need to be used to remove.
2. Align the Left Electronics and Right Electronics assemblies as shown and push the pieces
together over the bracket on a flat surface.
Bracket
3. Install (4X) M3 X 6 PHMS screws and (2X) M3 X 6 FHMS BLK to secure the Left
Electronics and Right Electronics assemblies.
M3 X 6 FHMS BLK
M3 X 6 PHMS
Planar UltraRes L Series 109" User Manual
020-1434-00A
40
Page | 40