Table of Contents
Advertisement
Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Optional front bezel
•
System cover
•
Drives
•
Backplane cover
•
Inside the system
•
Air shroud
•
Cooling fans
•
System memory
•
NVDIMM-N battery
•
Processors and heat sinks
•
Expansion cards and expansion card risers
•
M.2 SSD module
•
Optional IDSDM or vFlash module
•
Optional IDSDM or vFlash module
•
Network daughter card
•
Integrated storage controller card
•
Backplane
•
Cable routing
•
SAS expander card
•
Rear drive cage
•
System battery
•
USB module
•
VGA module
•
Optional internal USB memory key
•
Optical drive (optional)
•
Power supply units
•
System board
•
Trusted Platform Module
•
Control panel
Safety instructions
NOTE:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of
electric shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
34
Installing and removing system components
4
Advertisement
Table of Contents
