Table of Contents
Advertisement
Figure 76. Removing the integrated storage controller card
Next steps
Install the integrated storage controller
Installing the integrated storage controller card
Prerequisites
Follow the safety guidelines listed in
Steps
1. Angle the integrated storage controller card and align the end of the card with the controller card connector on the system
board.
2. Lower the connector side of the integrated storage controller card into the integrated storage controller card connector on
the system board.
NOTE:
Ensure that the slots on the system board align with the screw holes on the integrated storage controller card
connector.
94
Installing and removing system components
card.
Safety instructions
on page 34.
Advertisement
Table of Contents
