Table of Contents
Advertisement
Rear Panel
Video Input Modules
The SE-700 provides four video input channels. There are two
SDI inputs (BNC connectors) and two HDMI inputs.
Video Output Modules
The SE-700 provides three video output channels. There are
two SDI outputs (BNC connectors) and one HDMI input.
Audio Input
Two channels of XLR Balanced Audio Input.
GPI
GPI output connection for basic control of other externally-
connected devices
Ethernet Port
This port allows connection of the SE-700 to the PC for
Firmware Update.
Reserved for remote control of the SE-700.
TALLY Output
Sends Red, and Green tally signals to each channel.
Red indicates On-Air, and Green indicates next camera
source.
DC IN
DC in socket connects the supplied 12V / 19W PSU. The
connection can be secured by screwing the outer fastening
ring of the DC In plug to the socket.
Grounding Terminal
When connecting this unit to any other component, make
sure that it is properly grounded by connecting this terminal
to an appropriate point. When connecting, use the socket
and be sure to use wire with a cross-sectional area of at least
2
1.0 mm
.
Advertisement
Table of Contents
