Pip-Picture In Picture Function; Pip Settings; Pip Preset And Pip Program; Assigning A Video Source Input To A Pip - Datavideo SE-2800 Instruction Manual

DIGITAL VIDEO SWITCHER

PIP-Picture In Picture function

The SE-2800 Picture in Picture function allows
you to place one or two smaller PIP images over
a chosen full size background image. The smaller
PIP images can be set to pre-defined sizes and
positioned almost anywhere within the Preview/

PIP Settings

Before trying to activate the PIP function it is best to understand how to set up or choose the right
options for your production. Press the ENTER Key in the MENU area of the SE-2800 keyboard.
Navigate to the PIP Settings option using the down arrow key. The PIP menu options provided here
are:
PIP Settings
PIP 1 PIP 2
PIP 1 PIP 2
20
Position PIP1
Size PIP1
Border PIP1
Position PIP2
Size PIP2
Border PIP

PIP Preset and PIP Program

When looking at the top right corner of the SE-2800 Control Panel /
Keyboard there are four PIP keys. These are labelled Program and Preset.
The upper PIP1 and PIP2 keys relate to activating Picture In Picture images
on the Program outputs.
The lower PIP1 and PIP2 keys relate to activating Picture In Picture images
on the Multi-view or Preview outputs

Assigning a video source input to a PIP

Using the lower PIP1 or PIP2 buttons you can assign a selected video input
to the chosen PIP video layer.
1) First press and hold down the required PIP button on the lower row. The
Preset row of input sources will light.
2) While still holding down the PIP button, press to select the required input
from the Preset row.
3) The input will flash to confirm it is selected.
This selection will also be confirmed on the HDMI Multi-view, with a P1 or
P2 label shown next to the selected input image.
Program screen area. These PIP windows can
also have a coloured border applied, and can
be brought into the production with a default PIP
dissolve transition.
X-Position (Left to right)
Y-Position (Lower to Upper) = 000 to 108
PIP Size = 1 (small) to 33 (large)
Border Size = 0 (OFF), 1 (Thin) to 15 (Thick)
Border Color = 1 to 8 (user defined colours)
1=Yellow, 2=Cyan, 3=Green, 4=Magenta, 5=Red, 6=Blue
= 000 to 097