Stream And Record Buttons; Record Button; Stream Button - Datavideo KMU-300 Instruction Manual

5.4 Stream and Record Buttons

operations of these four buttons in detail.
RECORD and STREAM Button LED behaviors are listed in the table below:

RECORD Button

Solid White Record function in idle state
Record function is activating
Blinking Red
or resetting
Solid Red Record function activated
Record Button
Press the RECORD button to start/stop recording.
Start recording
 When idle, the RECORD button is solid white.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is activating, the RECORD button turns from solid white,
then blinking red and finally to solid red.
 When the RECORD button is solid red, this indicates that the record function has
been successfully activated.
Stop recording
 While recording, the RECORD button is solid red.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is terminating, the RECORD button turns from solid red,
then blinking red and finally to solid white.
 When the RECORD button is solid white, this indicates that the record function has
been successfully terminated.

Stream Button

Press the STREAM button to start/stop streaming.
Start streaming
 When idle, the STREAM button is solid white.
 Press and hold the STREAM button for approximately 2 seconds.
The RECORD, STREAM, VERTICAL and BITRATE
buttons on the front panel of the KMU-300
give the user certain controls of the record and
stream functions. In this section, we will cover
STREAM Button
Stream function in idle state
Stream function is activating or
resetting
Stream function activated
61