Upload Pump Program Settings To The Pump - Graco G3-G-24MX-2L0L00-10CV00R0 Instructions Manual

Max Model Setup
4. When download is finished, "done"
is displayed.
5. G3 pump resumes operation.
6. After the download is com-
plete, press and hold the UP
and DOWN ARROW button
for 3 seconds to store the
current setup to the USB
flash drive.
7. "data" is displayed while the unit is
downloading and storing the config-
uration on the USB drive.
8. When configuration is stored,
"done" is displayed.
9. G3 pump resumes operation.
10. Remove the USB flash drive.
Upload Pump Program Settings
to the Pump
1. Plug the USB flash drive into the USB port.
NOTE:
• The USB flash drive must contain file
GRACO/G3Config/g3config.bin (for 0209 and
earlier) or GRACO/Config/config.bin (for 0706
or later).
NOTE: 0707 pumps can take either file setting
to upload, but earlier pumps cannot. File
names and folders may need to be changed
manually when importing settings to an earlier
version pump from a later version.
• The G3 pump stops pumping as soon as the
USB flash drive is plugged into it.
2. The system automatically begins downloading data
to the USB drive.
3. "data" is displayed while the system
is downloading files.
4. When download is finished, "done"
is displayed.
42
5. G3 pump resumes operation.
6. After the download is com-
plete, press and hold the
RESET button and UP
ARROW button for 3 seconds
to upload the setup stored in the USB flash drive.
7. "data" is displayed while the unit is
uploading the configuration data.
8. When upload is finished, "done" is
displayed.
9. G3 pump resumes operation.
10. Remove the USB flash drive.
11. After the USB flash drive is
removed, press and hold the
UP and DOWN ARROW but-
tons for 3 seconds to enter
the SETUP MODE (see
Entering Setup Mode, page 33).
12. In SETUP MODE, set the YEAR, MONTH, DATE
and TIME (see Setting the Real Time Clock, page
34).
13. After pressing the ENTER button to set
the TIME, press the RESET button to
exit the SETUP MODE.
View the UNIT DMS ID Number
1. In RUN mode, press and hold the
DOWN ARROW button.
2. The Unit DMS ID number displays. The
unit continues to normal operation
while the DMS ID is displayed.
3. Release the DOWN ARROW button after viewing
the DMS ID number.
332305R