Optional Installation - Without Remote Fill Manifold - Graco G3-G-24MX-2L0L00-10CV00R0 Instructions Manual

Installation

Optional Installation - Without Remote Fill Manifold

The installation shown is only a guide for selecting and installing system components. Contact your Graco distribu-
tor for assistance in planning a system to suit your needs.
NOTE: The remote filling station pump stalls (dead-heads) when the reservoir is full. If the pump does not stall
(dead-head) there is a leak in the system.
H
S
E
F . 6
IG
Key:
A G3 Pump
B Auto-Fill Shut Off Valve
C Auto-Fill Inlet
D G3 Reservoir
E Remote Fill Reservoir
F Remote Fill Pump
H Relief Valve
J Supply Hose (user supplied)
L Drain Tube
L1 Option - To reservoir
L2 Option - To overflow container
S Pressure Regulator and Gauge
U Pressure Relief Valve
V Quick Disconnect
W Overflow Container
Y Supply Hose Pressure Relief Valve❖
❖ To relieve the stall pressure in the fill line a ball valve (Y)
must be installed in the system.
12
F
U
J
V
Y
L
L1
L2
W
B
C
D
A
332305R