C. Cables and Pin Assignments
50-Pin Telco Connector Pinouts for Model 8775 in a
Hotwire 8600 DSLAM
The connector on the front of the Hotwire 8600 DSLAM (labeled LINE) provides
the 2-wire loop interface from each DSL port to the MDF. The following table lists
the pin assignments for each of these interfaces.
Table C-1. 8600 LINE Connector Pinouts
C-2
NOTE:
When the 8600 chassis is the base chassis, the Management
Communications Controller (MCC) is installed in Slot 1; the Tips and Rings
for Slot 1 are not connected internally and are not active.
LINE Connector
Card, Port
Card 1, Port 1
Card 1, Port 2
Card 1, Port 3
Card 1, Port 4
Card 2, Port 1
Card 2, Port 2
Card 2, Port 3
Card 2, Port 4
Card 3, Port 1
Card 3, Port 2
Card 3, Port 3
Card 3, Port 4
February 2001
Connector Pins
(Tip, Ring)
1, 26
2, 27
3, 28
4, 29
5, 30
6, 31
7, 32
8, 33
9, 34
10, 35
11, 36
12, 37
8700-A2-GB25-10