3. Initial Startup and Configuration
Restoring Access to the User Interface
Improper configuration of the unit could render the user interface inaccessible.
If this occurs, access can be restored using the MCC.
Procedure
To reset the DSL Card:
You can also restore access to the user interface by reloading the Default Factory
Configuration options using the unit's menus.
Procedure
To restore access to the ATI using the unit's menus:
Resetting the Unit
If the user interface is functional and you would like to reset the card without
removing it from the DSLAM, follow this procedure.
Procedure
To reset the unit from the Control menu:
3-12
1. Follow this menu selection sequence:
Configuration
DSL Cards
2. Enter DSL nn , where nn is the slot number for the DSL card you wish to reset.
3. Enter Reset.
4. Enter Y if you want to clear NVRAM also, otherwise enter N.
Entering Y restores the Default Factory Configuration.
5. Enter Y at the prompt to confirm.
NOTE:
When you enter Y, all data connectivity is interrupted.
Main Menu Configuration
1. Follow this menu selection sequence:
Main Menu
Control
The message Are you sure? appears.
2. Enter Yes.
February 2001
Reset Slot
Default Factory Configuration
Reset Device
8700-A2-GB25-10