Running Network Tests - Paradyne Hotwire 8775 User Manual

5. Testing

Running Network Tests

To access the Network Tests screen, follow this menu selection sequence:
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
Selecting a Stop command on the Network Tests screen, or Abort All Tests from
the Test menu, will not disrupt a network-initiated loopback.
When the Send and Monitor 511 test is active, ResetMon is available to reset the
error counter to zero.
5-2
Main Menu Test Network Tests
main/test/network
Slot: 4
Port: 4
Test
--------------------------------------------------------------------------------
Local Loopbacks
Line Loopback:
Repeater Loopback:
Remote Loopbacks
Send Line Loopback: Down
Pattern Tests
Send and Monitor 511
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
ResetMon
February 2001
NETWORK TESTS
Command Status Results
Start Inactive 00:00:00
Start Inactive 00:00:00
Send Inactive 00:00:00
Stop Active hh:mm:ss - Errors 99999+
Hotwire
Model: 87x5
MainMenu Exit
8700-A2-GB25-10