Downloading Firmware - Paradyne Hotwire 8775 User Manual

3. Initial Startup and Configuration

Downloading Firmware

The Download Code screen allows you to download firmware from a TFTP server.
To access the Download Code screen, follow this menu selection sequence:
Procedure
To download firmware:
3-8
Main Menu Control
main/control/download_code
Slot: 4
Image File Name:
TFTP Server IP Address: 000.000.000.000
Destination: DSL1
Immediately Apply Download: No
Start Transfer: Yes
Packets Sent: 0000000
Packets Received: 0000000
Bytes Sent: 0000000
Bytes Received: 0000000
Transfer Status: Transfer Pending
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded.
The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name. The total path
name length can be up to 128 characters.
2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP server
IP address.
The first three digits of the IP address cannot be 000 or greater than 223.
3. Position the cursor in the Destination field. Use the spacebar to select a
network destination for the TFTP server.
4. Position the cursor in the Immediately Apply Download field. If you would like
the download to be effective immediately, select Yes.
5. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.
Press Enter.
When the data transfer is complete, the Transfer Status field changes to
Completed successfully.
February 2001
Download Code
DOWNLOAD CODE
Hotwire
Model: 87x5
Clear
Clear
MainMenu Exit
8700-A2-GB25-10