Ending An Ati Session; Exiting From The Dslam Session - Paradyne Hotwire 8775 User Manual

Ending an ATI Session

Use the Exit function key from any screen to terminate the session.
Procedure
To end a session with the asynchronous terminal interface:

Exiting From the DSLAM Session

You can manually log out of the system or, after five minutes of inactivity, the
system will automatically log you out if the inactivity time-out option is enabled.
Procedure
To manually exit from the Hotwire DSLAM system:
8700-A2-GB25-10
1. Press Ctrl-a to go to the function keys below the dotted line.
2. Save changes if required. A confirmation message appears if you have made
but not saved changes to your configuration.
3. Tab to Exit (or type e or E) and press Enter. If you have accessed the unit
through the management card, the Hotwire Chassis Card Selection menu
appears.
1. Return to the Hotwire Chassis Main Menu by pressing Ctrl-z or Ctrl-a from the
Hotwire Chassis Card Selection menu.
2. Press Ctrl-z.
The Hotwire Chassis Main Menu appears.
3. From the Hotwire Chassis Main Menu, select Logout.
The system exits from the current login session on the Hotwire DSLAM.
February 2001
2. Using the Asynchronous Terminal Interface
2-9