Paradyne COMSPHERE DualFlow 3615 User Manual page 134

COMSPHERE DualFlow Data Service Units
diagnostic
control panel, 1-2
DBM test initator, C-4, C-5
DBM, configuration options, 5-16
General, configuration options, 5-17
interface, 1-5
nondisruptive, 1-2, 1-3
tributary, 1-2, 1-3
Dial, status indicator, C-2
dial
backup, 4-7
configuration, 4-7
error messages, C-11
exceeded load threshold application, E-3
progress messages, C-9
received data errors application, E-2
network connection, 2-6, 3-8
network connector, pin assignments, D-2
Dial Attempt failure message, C-7
Dial Backup mode, 4-8
Dial Test, DBM option set, 5-11
Dial Tone Test Failure alarm, C-2
Dial Tone: Fail message, C-5
DialBU message, C-8
DialCN message, C-8
DialTn message, C-8
DiDg, 2-5, 4-13
application, E-4
area, 5-1
Digital
facility alarm, C-5
Loopback, 4-9, 4-10
DBM test message, C-4
DSU test message, C-5
network connector, D-1
pin assignments, D-2
Test, 2-12, 3-12, 4-11
DBM test message, C-4
DSU test message, C-5
results, 4-11
Dir, 4-16
Dir Empty, DBM error message, C-11
directory, 4-16
characters, 4-16
Disab message, C-8
Disable, DSU or DBM message, C-6
Disabled DBM message, C-9
Displ, 4-11, 4-20
displaying external leads, 4-20
DL, 2-12, 3-12, 4-10
DBM test, C-4
DSU test, C-5
Drop:DTR Disc message, C-7
DSR, status indicator, C-2
DSR FrcOn
DBM Port option set, 5-14
DSU Port option set, 5-8
DSR on Tst
DBM Port option set, 5-14
DSU Port option set, 5-8
Index-4
DSU
compatibility, 1-5
configuration options, 5-6
Device Fail message, C-5
Disable message, C-5
menu, A-1
Port, configuration options, 5-7
status indicators, C-2
technical specifications, 1-5
DSUTst message, C-5
DT, 2-12, 3-12, 4-11
DBM test, C-4
DSU test, C-5
DTE, 2-12, 3-12, 4-5, 4-10
connectors, 1-1, D-4
DBM test, C-4
DBM test initator, C-4
DBM test initiator, C-4
DSU test, C-5
DSU test initator, C-5
DSU test initiator, C-5
interface, 1-4
Loopback, 4-9, 4-10
DBM test message, C-4
DSU test message, C-5
status, 4-5
DTE Port
DBM Port option set, 5-13
DSU Port option set, 5-7
DTR
control setup, 1-2, 1-3
message, C-8
status indicator, C-2
DTR Alarm, C-2
DBM Port option set, 5-15
DSU or DBM message, C-6
DSU Port option set, 5-9
DTR Discon
DBM error message, C-11
failure message, C-7
DTRCallCon, DBM option set, 5-12
dynamic range, 1-6
E
EC, status indicator, SDCP, C-3
EchoCancel, DBM option set, 5-12
editing configuration options, 5-2
E-E, DBM test, C-4
EE, 2-12, 3-12, 4-11
EIA-232/V.24 connector, pin assignments, D-5
EIA-232-D
connector, 1-1
crossover cable, D-7
electrical connection, 2-4
emissions, CSA, 1-4
End-to-End Test, 2-12, 3-12, 4-11
DBM test message, C-4
results, 4-12
entering telephone number, 4-17
environment, 1-4
July 1999 3615-A2-GB20-40