Paradyne COMSPHERE DualFlow 3615 User Manual page 102

COMSPHERE DualFlow Data Service Units
Message
Redun Fan Alarm
Redun Pwr Alarm
Subnetwrk Alarm
Subtree Truncat
OutofFrameThresh
nn.n DDS
nnn Disable
nnn DTR Alarm
nnn StreamTerm
C-6
Table C-3
(3 of 3)
Device Health and Status Messages
Indicates a problem with the fan on the – 48 Vdc Central Office Power Unit.
Indicates a problem with the power on the – 48 Vdc Central Office Power Unit.
A major alarm was set Off by one of the devices in your subnetwork. Check the
Subnetwork Health and Status report.
Downstream health and status information has been truncated because it overflowed
system limits.
For DBMs operating on a single port (rate adaption or nondisruptive), the local DBM
has detected a continuous Out-of-Frame condition. The alarm clears when a local DBM
synchronizes with a remote DBM.
On a point-to-point circuit, if the alarm continues and the local DSU is configured for
automatic backup, the local DSU disruptively tests the DDS circuit. If the test fails, the
local DSU initiates a DDS Facility Alarm and initiates dial backup.
Indicates the speed ( nn.n ) of the DSU core when there are no alarms.
Transmitter at nnn (DSU or DBM) is disabled. (Go to the Control branch to enable the
DSU or DBM.)
The DTR lead at nnn (DSU or DBM) has been Off for more than 30 seconds.
Streaming terminal. DTE at nnn (DSU or DBM) has its RTS lead turned ON longer than
the predefined time.
July 1999
Condition
3615-A2-GB20-40