Paradyne COMSPHERE DualFlow 3615 User Manual page 125

Data service units
Hide thumbs Also See for COMSPHERE DualFlow 3615:
Table of Contents

Advertisement

auto backup
auto restoral
callback directory pointer
carrier
carrier-mounted
channel
CMI
control
Control Channel (CC)
core
CSA
3615-A2-GB20-40
Glossary
A function of the dial backup module (DBM) or carrier-mounted dial backup unit,
whereby the DSU activates the DBM to reestablish a line automatically when a
facility alarm is detected from the DDS network.
A function of the DBM whereby the DSU automatically returns to the DDS
network when service is restored over the private line. On point-to-point circuits,
the DSU test the integrity of the DDS network before switching data back to the
private line.
The directory entry in an originating DBM consists of the answering DBM's
telephone number, a delimiting character, and a callback pointer. The pointer
identifies the originating DBM's telephone number in the answering DBM's
Backup Directory.
The DSU device for mounting circuit cards that contains 17 slots: 1 control slot for
an SDU, with 16 DSUs and DBM or modem slots.
A Model 3616 DSU that is designed for installation in a COMSPHERE 3000 Series
Carrier and used at central-site operations. Up to 16 DSUs can be installed per
carrier, with 6 carriers per cabinet.
A channel is an independent data path used for full-duplex transmission of
customer data.
Control Mode Idle. A control signal sent over the DDS line to indicate that no data
activity is being sent.
A DSU, DBM, or modem that is, for diagnostic purposes, at the logical head of a
hierarchical network. It is the unit from which tests and commands are issued to
other units on the same circuit. There is only one control per link.
The diagnostic interface between an NMS and the SDU.
A function of the circuit card that provides data transmission capability. With a
DualFlow DSU, there are two cores – one in the DSU and one in the DBM; data
can be transmitted through either. The function of the DSU that is normally running
when power is supplied to the unit is the primary core. The core that is transmitting
data is the active core.
Canadian Standards Association.
July 1999
Glossary-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comsphere dualflow 3616

Table of Contents