Command Progress Messages; Dial Backup Progress Messages - Paradyne COMSPHERE DualFlow 3615 User Manual

Progress Messages
Table C-6 describes the command progress messages;
Table C-7 describes the dial backup progress messages.
Message
Please wait . . .
Command Complete
Command Failed
Message
DBM:Answering
DBM:Callback
DBM:Connected
DBM:Disabled
DBM:FoundAnswTon
DBM:Ringing
DBM:Standby
DBM:Starting Up
DBM:WaitForAnswr
DBM:Wait Callbck
DBM:WaitForSync
DBM:xxxxxxxxxxx
3615-A2-GB20-40
Table C-6

Command Progress Messages

Command is taking more than 2 seconds to complete.
Command has been completed.
Command was unable to be executed.
Table C-7

Dial Backup Progress Messages

DBM is answering an incoming call.
Callback sequence has initiated.
DBM is connected.
No calls can be initiated or answered.
A 4-wire Switched 56 DBM is answering an incoming call.
Ringing at remote DBM or external DBU (dial backup unit).
A connection is made but the digital circuit is still the active link.
The DBM is training for synchronization.
A call has been placed and the DBM is waiting for connection.
The DBM is expecting a call back from remote DBM or external DBU.
Call placed and waiting for connection (2-wire Switched 56 DBM only).
The last 11 digits for the telephone number that has been dialed.
July 1999
Status Indicators and Control Panel Messages
Condition
Condition
C-9