Installing The Sdu - Paradyne Compshere 3000 Series Installation Manual

Installing the SDU

"
Procedure
1. Using a Phillips screwdriver, loosen the screw
holding the circuit pack lock. Rotate the lock to
the open position.
Circuit
Pack
Lock
Closed
(Locked)
Open
(Unlocked)
Latch
3000-A2-GA31-D0
2. With the latch in the open position, insert the
3. Slide the SDU circuit card into the slot until the
P17-SDU
Backplane
Connector
Circuit
Card
Guides
4. Press the latch to secure the SDU in the carrier.
495-14813
July 1999
Installing the Carrier and Assembly Components
circuit card into the top and bottom card guides of
the slot labeled SDU.
SDU backplane connector is seated firmly in P17.
P17
P18
Rotate the circuit pack lock back into the closed
position, and tighten the screw.
496-14920
3-19