Paradyne Compshere 3000 Series Installation Manual page 102

COMSPHERE 3000 Series Carrier
D
DB25 port interface, EIA-530-A, B-6
DC, SDU DIP switch, 3-18
DC OUT/DC IN, SDU jack, 3-17–3-19
devices, in carrier, 5-1–5-2
diagnostic channel, extension for T1, B-10
dial, NIM, A-2
dial modem, control interface, 3-16
digital
network connections, A-1
network interface, 5-3–5-4
DIP switches, on SDU, 3-17–3-18
D-lead, control signaling, 3-16
documentation, ordering, D-1–D-2
DSU, 6-port connector module, 6-4
DSX-1 port, DTE interface, B-4
DTE interface
assembly installation, 6-5
DSX-1 port, B-4
T1 DSX-1, B-4
E
EIA-232-D crossover cable, B-9
EIA-530-A, DB25 port interface, B-6
equipment, standard, 3-2–3-3
equipment list, D-3–D-6
external clock connector, for T1, B-10
F
fan module
cooling requirements, 3-11
installation, 3-10–3-11
ferrite choke, installation, 6-8
FGRD connection. See SGRD/FGRD
filler panels, installation, 6-8
FP IN/FP OUT
SDU interface connection, A-3
SDU jack, 3-20
front panel, SDU connection, 3-20
G
ground, connection, 3-14
grounding clip, for rear connector plate, 6-3
Index-2
I
installation
24-port NIM, 5-7–5-8
6-port connector module, 6-5
carrier in cabinet, 3-4–3-6
circuit cards, 6-1–6-8
connector, plate, 6-3
DTE interface assembly, 6-5
fan module, 3-10–3-11
ferrite choke, 6-8
filler panels, 6-8
NIM, 5-6–5-7
power transformer unit, 3-8–3-10
ribbon cable for SDCP, 3-7–3-9
SDCP, 3-6–3-9
SDU, 3-16–3-19
site, 3-3
speaker panel, 3-12–3-13
T1
auxiliary backplane, 4-1–4-5
DSU/CSU circuit card, 6-7–6-8
tools required
for leveling cabinet, 2-2
for T1 auxiliary backplane, 4-2
interface
circuit card connectors, 6-2
COM port, B-5–B-6
connections, A-1–A-8
connectors, 5-3
D-lead control, A-8
NMS connections, A-3
RS-449 port connector, B-7
T1 port, B-6–B-8
V.35 port connector, B-8
ISDN, NIM, 5-5
interface connection, A-2
J
jacks, for SDU, 3-17–3-19
L
LAN adapter, SNMP connectivity, 4-5
leased-line, network interface, 5-3
M
MI/MIC, control signaling, 3-16
modular plug, pin assignments, A-4–A-6
July 1999 3000-A2-GA31-D0