Paradyne Compshere 3000 Series Installation Manual page 101

Numbers
24-port
50-pin modular plug, A-4
DTE interface assembly, 6-5–6-6
NIM, 5-7–5-8
cable, 5-7
interface connection, A-2–A-3
2-wire switched 56 kbps, NIM, 5-5
interface connection, A-2
4-wire switched 56 kbps, NIM, 5-5
interface connection, A-2
6-port, connector module, 6-4
A
address, setting for carrier, 3-17
alarm output, connection, 3-15–3-16
analog, network interface, 5-3–5-4
async terminal, COM port connection, B-5–B-6
auxiliary backplane. See T1 auxiliary backplane
B
brackets, for carrier, 3-4
C
cabinet
leveling, 2-2
reverse door, 2-2
setup, 2-1–2-2
cable
50-pin connector, A-1
EIA-232-D crossover, B-9
cable retainer, for T1 auxiliary backplane, 4-4
3000-A2-GA31-D0
Index
carrier
assembly, 1-1–1-2
backplane connectors, A-7
brackets, 3-4
components, 1-2, 3-2
device arrangement, 5-2
equipment, 3-2–3-4
equipment list, D-3–D-6
installing in cabinet, 3-4–3-6
setting address, 3-17
technical specifications, C-1–C-6
CC, SDU DIP switch, 3-18
CC IN/CC OUT
SDU interface connection, A-3
SDU jack, 3-17–3-19
circuit card, installation, 6-1–6-8
COM port, interface, B-5–B-6
components, carrier, 1-2
connection
alarm output, 3-15–3-16
network, A-1
NMS, 3-21–3-23
NMS/SDU, A-3
SDU front panel, 3-20
SGRD/FGRD, 3-14
T1 COM port, 4-6
connector
carrier backplane, A-7
circuit card interface, 6-2
EIA-530-A, DB25 port interface, B-6
interface, 5-3
module installation, 6-4, 6-5
NIM, 5-4–5-6
rear plate, 6-3
RS-449 port interface, B-7
T1
auxiliary backplane, B-1–B-2
channel extension cable, B-10
DTE interfaces, 4-5
external clock, B-10
network interface, 4-5, B-3
V.35 adapters, 4-5
V.35 port interface, B-8
control interface
dial modem, 3-16
D-lead, A-8
cooling requirements, fan module, 3-11
July 1999 Index-1